Why am i hearing static in my headphones

HTMLFont size

Note: Any/all of the links on this short article consists of affiliate web links. If you buy something utilizing a connect on this web page as an amazon associate I earn from qualifying purchases (at no additional cost to you). Learn even more


There are several feasible reasons why headphones make irritating, crackling sounds. The most common incorporate jack troubles, loose wires, bad EQ, and interferences.

You watching: Why am i hearing static in my headphones

However, sometimes it's not straightforward to pinsuggest the resource, which is why we're going to teach you just how to recognize the reason, and also consequently, apply the appropriate solution.

1: Auxiliary Port Issues

The the majority of widespread reason of static noise in headphones is a defective auxiliary port, which is additionally recognized as the headphone jack.

The most basic way to identify if this is the problem is by plugging your headphones right into several miscellaneous AUX ports to know if the crackling proceeds.

In some situations, it's a matter of not plugging in the headphone jack altogether.

A partly plugged-in pair of headphones indicates poor electrical connection, which outcomes in static noise.


These wires enable the activity of digital signals to and also from the speakers.

It's easy to bend the casing bereason of the product, specifically if you tfinish to loop it.

In impact, the wires lose the electronic signals, developing crackling noises at the very same time.

3: Poor Equalization

There are cases wherein static noise results from the negative quality of the source product.

If the treble or bass settings are set as well high, the volume can max out and make popping or cracking noises.

Aside from that, listening to anything at excessively high volumes deserve to develop static noise if the headphones were not intended to emit sound levels at the high volumes you routine.

4: Hardware Interference

Did you understand that hardware interference deserve to likewise produce static noise in headphones?

This is something you could not notification, but phones, printers, or other devices with digital signals deserve to occasionally cause interference, which then results in crackling sounds.

5: Broken Speakers

The worst-instance scenario is a damaged headphone speaker. This might be due to negative wiring or irreversible wear and also tear.

Sometimes, listening to high volumes or physical damage can additionally affect the quality of speakers.

6: Unclean Audio Jack


Look who's been covertly harboring debris all this time? Yes, you may not alert that the audio jack gets dirty each time you plug and also unplug the headphones.

Sometimes, some of that dirt will certainly remajor in the wires. Unfortunately, such stains prohilittle bit the devices from functioning correctly.


Now that you've interpreted the feasible reasons of static noise, the following action is to cut it out altogether.

Here, we're going to dive into assorted options to fix the issue and also gain the finest quality sounds from your headphones.

1: Check the Hardware

The initially troubleshooting alternative to consider is checking the hardware.

If you hear static noise after plugging the headphones' jack in a computer, try replugging it to a different tool.

If the hissing sounds persist, then you may must execute some cleaning or replace the headphones. We'll comment on even more of this in the future.

Aside from that, you have to relocate away from a couple of home appliances.

Remember that other gadgets can produce interference, and periodically, the easiest method to solve this is by preventing those gadgets.

2: Inspect the Wires

Tright here are times once our unconscious activities result in the loosening of wires.

For example, you're sitting in front of the computer system while utilizing your headphones for a meeting.

Suddenly, your pet zoomed in and also hit something, resulting in your reflexes to take over and also catch the item.

In the process, you've pulled the wires, producing a opportunity for static noise to come with.

You can conveniently settle this by tightening the wires. Also, carry out you understand the old trick of blowing into the jack? Well, periodically that works, as well.

More frequently than not, we perform not notification that corrosion or dirt gets stuck in the process of plugging and unplugging.

A computer system generally consists of several audio jacks. To reduce or reduced static noise, it's advisable to pull out the wire from the one you are utilizing. Then, insert it to a various allude.

While this is a temporary solution, it works finest if you don't have actually much time in your hands, and also you need an prompt solution.

If the noise proceeds, then the problem is not via the port. Instead, tright here might be even more substantial damages to the headphones.

4: Turn the Volume Down

Tright here are times once an easy move of turning the volume down deserve to cut static noise. If the noise stops, possibly the volume was as well loud for the headset to take care of, to begin with.

It's likewise possible that the device's amplifier doesn't have enough power to drive the headset.

One of the a lot of prevalent difficulties with static noise on headphones is with the plug.

That's the part that goes into your computer system, phone, or sound mechanism. Hence, you tend to tug it the hardest.

Because the plug is wbelow many relations are made, it likewise becomes the weakest attach once subjected to force and also environmental facets.

Whenever before you attempt to twist the plug in futile attempts to improve the sounds, occasionally you'll finish up amplifying the static noise.

In this case, what you must execute is to repair the plug. This one's a little technological and requires you to present some handiness prowess.

See more: Windows 10 End Task Access Denied, Unable To Terminate Process Error In Windows 10

If you have the time, abilities, and also equipment, soldering have the right to assist you repair the audio jack headphone relations.

6: Cut the Cable and Prepare the Wires

To view the reason of the problem, cut the cable around an inch from the link to the plug. Use a pair of snips to remove an inch of the wire's external jacket.

Normally, there are three internal wires: one for the left ear, an additional for the best ear, and a ground.

You need to watch two ground wires that you deserve to sign up with with soldering later. Make sure to twist the two ground wires together.

Tin the Wires

Turn on the soldering iron. Once it's fully hot, take a item of solder and use it to the ends of the wires.

Use a sponge to clean off the solder that builds up on the tip of the iron.

Solder the Wires to the Plug

Unscrew the casing from the plug and slip it on the wire. Locate the 2 contacts; one is brief while the other is much longer.

If the wires are rubber coated, the right signal wire can be red, the left signal wire is most likely white, while the ground wire is babsence.

If the wires are insulated through enamel, the best signal wire is probably red-colored while the left signal wire is likely green.

Slip the tinned ends of the wires into the holds on the contacts of the plug. Solder the wires in location.

Perdevelop a Test

After linking all three contacts, screw the casing onto the jack. To test them out, plug them right into an audio source, and listen to somepoint.

7: Correct the Playearlier Settings of a Computer

Another way to remove static noise in headphones is by checking and also correcting the audio settings.

This one just applies to computers, but phones and music players generally additionally have actually audio settings you have the right to tinker through.

Although, in general, reresolving imcorrect audio settings can aid alleviate static sound problems.

If done effectively, you deserve to even prevent this from happening again.

All you have to perform is sindicate follow these steps:

Find the speaker symbol on the Taskbar and also right-click it.From the list of choices, choose Playback Devices from the content food selection.From the Sound Setups dialog box, locate the headphones in the list of devices.Open the properties and also locate its Levels Adjustment settings.Move the slider to Zero and also click Apply.Find and also click on the Enhancement Settings.Enable the Disable All Sound Effects checkbox.Confirm all your transforms and click OK repeatedly till you departure from all the open dialog boxes.

8: Update the Sound Card Driver

Updating the driver instantly or manually can likewise assist you remove static noise in headphones.

The first point you should perform is visit the manufacturer's webwebsite and examine if there are any kind of updated versions for the driver accessible.

If tbelow is one, downpack it and install the updated variation on your computer. However, you need to make sure that the drivers are designed for your sound card model.

Installing a driver not meant for your particular card might render the sound card unfunctional.

Furthermore, you should encertain that the sound card is in the port. It would also be finest if you clean up dust roughly the card.

9: Install a New Sound Card

If updating doesn't eliminate the static noise in your headphones, then the next finest thing to do is to install a brand-new sound card.

Here are easy-to-follow actions to modify the sound card in your computer:

Shut dvery own the audio source, disaffix peripheral tools, and remove any power cord.Remove the screws of the soundcard frame.Open the motherboard slot and press the card gently.Recheck if the card is firmly fit.If you need to install a brand-new one, line up the side via the metal contact points through the open up motherboard slot. Push down on the card till it's securely nestled in the slot.Screw with the sound card bracket to secure the computer's structure.Close the computer case.Attach the cables, peripherals, and also accessories.

10: Move Your Speakers

As you've found previously, static noise might likewise be because of hardware interference.

If tbelow are various other electric devices stationed close to the audio source, tbelow might be static noise.

The many handy solution is to move the speakers away from other tools till the interference goes ameans.

If an inspection doesn't execute any type of good or it's also risky to try to repair the headphones by yourself, the following ideal point to do is to upgrade to more advanced headphones.

We suggest opting for noise cancelling headphones because not just deserve to this block exterior noises, however this have the right to additionally encertain the absence of static noise. 

Keep in mind that the listening suffer relies on the audio top quality of the headphones.

Sometimes, it's high time to relocation your current pair after years of enthroughout force as a result of plugging or safemaintaining.

Besides, brand-new headphones come via progressed attributes that make them last much longer, both in terms of high quality and durability.

Cleaning and Maintenance

Finally, cleaning applies to both old and also new headphones. Like in all various other things, especially devices, maintenance is a cost-efficient method to maintain top quality.

The excellent news is that cleaning audio jacks is basic. Here are the measures you should do:

Make certain to rotate off the tool you're cleaning and also unplug cords from the power supply.Take a cotton swab and moisten the pointer with Isopropyl alcohol.Insert the tip of the swab into the headphone jack.Slowly twist it back and also forth. Clean both the inside and also exterior of the jack.Repeat the cleaning process until the swab shows up clean.

If you don't desire to use alcohol and also cotton swabs, an additional method is to buy a deserve to of compressed air.

Air is leastern most likely to damage the jacket considering that you won't insert anypoint inside the hole various other than the air.

With compressed air, you just must suggest the nozzle at the headphone jack.

Then, push the system that will certainly release the air. Two blasts of dispensed air must be enough to moisten debris inside the jack.

Wrapping Up

Headphones help you listen to audio and perform your work-related without disturbance from outside resources.

Although, sometimes, internal concerns deserve to cause distractivity. When you start to hear static noise, tright here are a few possibilities regarding why this is happening. 

With the tips we've questioned, you have actually numerous solutions to resolve the problem to let you acquire the ideal audio top quality from headphones.

See more: Asus Pci Data Acquisition And Signal Processing Controller

Jessica is a Acoustical Engineer, currently based in the San Francisco Bay Area in California. After graduating from her degree in Master of Engineering degree in Acoustics from Solent College in 2014, Jessica operated for a few providers prior to She will certainly be blogging about her previous and also present experiences in the studio and also sharing her journey as she pursues her career objectives. She enjoy the balance of job-related inside and out of the office, fixing useful troubles on a everyday basis as eextremely project is different and requires a various solution, the selection of work (sound insulation testing, background noise survey, mechanical plant commissioning, exterior plant assessment, plant room breakout assessments) and the mix of independent and team job-related.