One of the backup files could not be created

Solutions to deal with the error: The repursuit can not be performed because of an I/O device error (0x8007045D), received while backing as much as a new difficult disk drive (HDD).



/ Last Updated March 22, 2017

The Scenario

When perdeveloping a backup to external hard drive on Windows Server 2003/2008/2012 (R2)/SBS 2003/2008/2011 or Windows 10/8.1/8/7/XP/Vista, you may enrespond to the adhering to error messages:

One of the backup records can not be created. (0x8078002A)The research can not be performed bereason of an I/O device error (0x8007045D) or (2147943517)Both error codes 2147943517, in decimal, and also 0x8007045D, in hexadecimal, represent the exact same I/O gadget error.

You watching: One of the backup files could not be created


The Cause

If the error got when the backup has actually remained in procedure for a while, there must be negative sectors on the backup resource disk or destination disk.If the error obtained when the backup is about to finish, the last cluster on the volume might have gone bad.If you backapproximately a large drive that has a 4K sector dimension, fairly than 512 bytes sector dimension, frequently offered in HDDs smaller sized than 2T, you might get this i/o error 0x8007045d for the backup and gain back tool on some old Windows versions is with conventional file format relying on 512-byte sectors.

The Resolution

You might attempt one or even more actions to obtain the tough drive I/O tool error solve,

Close various other software

Some defense applications might prevent the backup energy from accessing the difficult drive. You have the right to close all the various other non-device procedures. You may additionally need to disable antivirus software application temporarily. If the I/O tool error persists, you can boot your computer right into safe mode to try the backup aobtain. This method will minimize the affect of third-party applications to a minimum.

Check and also settle negative sector

1. Rress “Win+R” and also type “cmd” in package and also press Enter. You need to run it as administrator.

2. At the pop out command prompt, type in the complying with command also “chkdsk X: /f /r” and push Enter. “X” represents the drive letter of the partition you desire to inspect, “/f” represents the command to deal with errors and “/r” to find bad sectors and recover readable indevelopment.

3. After the process is finimelted, reboot and also retry the backup task.

Resize the partition

Shrink or extend the partition to bring the last cluster to another place and run the “chkdsk” command also aacquire. In Disk Management, Right-click the partition you want to shrink, and click Shrink Volume. Then follow the pop out Shrink Volume wizard to process. You have the right to also usage 3rd party software program to resize partition without information loss.

See more: Please Wait

Style to manufacturing facility default

Layout your hard disk drive to Factory Default through WD Fast Formatter tool and also retry. Note that formatting your tough drive to Factory Default will certainly reason it not recognizable in Windows XP and also all the information on it wiped out, so backup difficult disk if tbelow is helpful data on it.

Check physical sectorsize

If it still falls short with the very same error after these steps, your hard disk must be advanced format (4K) disk. You may consider switching an additional difficult disk drive to backas much as or upgrading your Windows in order to settle the difficulty that the repursuit can not be percreated bereason of an I/O tool error.

There are two forms of advanced format (4K) disks, one is 512-byte emulation (512e), which reports 512-byte as its logical sector size and 4KB as its physical sector size, the various other is 4 KB native, which has 4 KB as its logical and physical sector dimension.

Cutting edge format (4K) disk through 512-byte emulation is supported on Windows 8,Windows Server 2012,Windows 7 w/ MS KB 982018,Windows 7 SP1,Windows Server 2008 R2 w/ MS KB ,982018,Windows Server 2008 R2 SP1,Windows Vista w/ MS KB 2553708,Windows Server 2008 w/ MS KB 2553708.

To obtain the physical and logical sector dimension, you can run the command also “fsutil fsinfo ntfsdetails ” in an elevated command also prompt. If it mirrors “Bytes per sector: 512” and “Bytes per Physical Sector: 4096”, this is an advanced format (4K) disk via 512-byte emulation. If both lines show as 4096, it is a 4 KB aboriginal disk. If it reflects “Bytes Per Sector: Not Supported”, then the hard drive driver does not assistance IOCTL_STORAGE_QUERY_PROPERTY.

See more: Solved: How To Combine Two Audio Outputs Into One Pair Of Headphones


If you still receive the error “the request might not be percreated because of an I/O gadget error, you can try third party free backup software application or upgrade your system. Advance Style 4K Native disk is supported on Windows 8, Windows 10, Windows Server 2012 (R2) and Windows 2016.