Install hyper 212 evo without removing motherboard

Contents of Installation Kit
*
*
*
X-bracketBack PlateFan Brackets
*
*
*
*
*
Standoffs x 4Nut Setter x 1Nuts x 1Screws x 4
1. Remove the OEM mounting bracket from the motherboard.

You watching: Install hyper 212 evo without removing motherboard

*
2. Place the earlier plate on board as shown Below. (Make certain that the covered feet of bracket are emotional the bottom of the board.)
*

3. Place the standoffs through the board from the optimal and secure them via a nut as displayed listed below.
*
*
*
Note: Installing cross-edge have the right to make the install easierOnce all 4 standoffs are mounted, you may flip over the board to end up install.

See more: Windows 10 Consent Ui For Administrative Applications, What Is Consent

4. Attach the cooler to the CPU Socket
*

*

c. Hold a flat-edge at a 45 level angle to the chip and also slowly drag a even layer of paste throughout the top of the CPU.
*
*

*

a. Attach the fan to the mounting brackets with the supplied screws and cover the screws through the provided fan pads as displayed listed below.
a. Connect the fan to the 4 pin CPU fan location on your motherboard. (Please describe motherboard manufacturer for CPU fan location).

See more: How To Disable The Color Profile Setting Of The Application Software


b. (alternative 2) Connect the Fan 4 Pin connector to the 3 pin CPU fan area on the motherboard.(Please refer to motherboard manufacturer for CPU fan location).