A connection to the deployment share could not be made

Steps for getting Microsoft Deployment Toolkit (MDT) to Connect to the deployment share on brand-new systems. Summary:Steps for gaining Microsoft Deployment Toolkit (MDT) to Connect to the deployment share on new systems.See less Steps for acquiring Microsoft Deployment Toolkit (MDT) to Connect to the deployment share on new systems.


You watching: A connection to the deployment share could not be made

Microsoft Deployment Toolkit (MDT) Unable to Connect

You might see this error with Skylake or Kaby Lake systems equipped with integrated Intel Ethernet adapters (Figure 1):

*
Figure 1

If the PCI ID has 8086, the missing driver is Intel-based; Skylake and also Kaby Lake systems usage the Intel E1D series driver. Windows 10 offers NDIS 6.5, UEFI calls for 64-bit motorists, leading to E1D65x64.inf

Please browse to the vr-tab-quebec.com Support Site, and download the latest Windows 10 Intel Ethernet driver and put that into the MDT / SCCM (System Center Configuration Manager) for your computer system.


NOTE:
Updating the Windows ADK WinPE to the latest easily accessible (currently 1809) deserve to resolve driver related worries on more recent models (touchpad issues, and so on...).


See more: Hard Drive Runs Constantly Windows 7 Hard Drive Constantly Running

You may already have actually the Intel E1D driver 12.13 or 12.15 but the Skylake and Kaby Lake systems need 12.17 (same driver name yet different version).

Make sure to verify the PE driver selection profile only has the WinPE CAB file contents PE Selection Profile:

If you carry out not have actually a clearly characterized Selection Profile for Windows PE, one should be developed.

Selection Profile Creation

Downpack the latest Windows PE CAB file for the mechanism from the vr-tab-quebec.com support website (note the motorists are cross-compatible with most various other models) (Figure 2):
*
Figure 2 Extract the contents of the CAB file to a temp brochure (Figure 3).
*
Figure 3 Create a folder under Out-of-Box Drivers for Windows PE x64 (Figure 4 & 5):
*
Figure 4
*
Figure 5 Import the drivers from the x64 CAB folder right into the MDT Windows PE x64 CAB folder (Figure 6):
*
Figure 6 Create a Selection Profile that web links to the Windows PE x64 Drivers folder (Figure 7 & 8):
*
Figure 7
*
Figure 8 Select only the Windows PE x64 Drivers folder (Figure 9):
*
Figure 9 Download the latest Intel Rapid Storage driver (16.5 or later) (Figure 10):
*
Figure 10 Extract the Intel Rapid Storage driver to a temp brochure (Figure 11):
*
Figure 11 Import the Windows 10 vehicle drivers right into the Windows PE x64 Drivers folder (Figure 12 & 13):
*
Figure 12
*
Figure 13 Copy the 12.17 E1D65x64.inf driver (and the updated Intel Rapid Storage iaAHCI and also iaStorAC drivers to the Windows 10 Selection Profile (for Windows to usage in the time of and after deployment) (Figure 14 & 15):
*
Figure 14
*
Figure 15 Make certain Windows PE x64 Drivers selection profile is being provided for Windows PE: Right click on Deployment Share peak level, go to Properties (Figure 16):
*
Figure 16 Click on Windows PE, pick x64, Drivers and Patches: Change the selection profile from "Everything" to "Windows PE x64 Drivers" (Figure 17)
*
Figure 17 Update the Deployment Share to re-develop the Windows PE picture (do not use update) (Figure 18 & 19).
*
Figure 18
*
Figure 19 Rearea the MDT Windows 10 PE boot media in WDS / USB media with the brand-new Windows PE x64.wim (Figure 20 & 21).
*
Figure 20
*
Figure 21 Start the taracquire device and try the deployment aget.


See more: Dell Latitude E7240 Drivers Windows 10, 8, Dell Latitude E7240 Download Drivers And Specs

NOTE:
MDT pre-caches some deployment indevelopment on makers and also should be cleared off by pushing F8 at the connection error display to get to the command also prompt. Once tright here run the following: DISKPART >SELECT DISK 0 >CLEAN >EXIT EXIT Reboot and also run the deployment aget.